B&K Precision 9122A Single Output Programmable DC Power Supply, 2.5A, 60V
Huge Savings Item! Save 16% on the B&K Precision 9122A Single Output Programmable DC Power Supply, 2.5A, 60V by B&K Precision at Graph Barometer. SKU: 9122A. MPN: 9122A. Hurry! Limited time offer. Offer valid only while supplies last. This B&K Precision 9120A series single-output, programmable linear DC power supply unit provides a constant source of DC voltage and current for
This B&K Precision 9120A series single-output, programmable linear DC power supply unit provides a constant source of DC voltage and current for powering and testing electronic devices in research and development, production, and laboratory applications. The power supply unit (PSU) has one variable output that provides adjustable DC voltage and current. A built-in digital voltage and milliohm meter measures output voltage or 4-wire resistance. The PSU's internal memory can store up to 50 operating states for future recall. The PSU can be connected to a computer using an RS-232-to-TTL or USB-to-TTL serial converter cable (both included), and it can be controlled remotely with Standard Commands for Programmable Instruments (SCPI). Software is included for testing applications and for emulating the PSU's front-panel controls. A list mode lets the operator store a command sequence in the PSU's internal memory for future execution. A 4-pin connector on the rear of the unit accepts digital input/output (I/O), discrete fault indicator/remote inhibit (DFI/RI), and external triggers input and output. The discrete fault indicator/remote inhibit (DFI/RI) function permits simultaneous control of multiple power supplies. A lock feature disables the front-panel keypad to help prevent accidental input. The unit's vacuum fluorescent display (VFD) is readable in low light. The PSU can sit on a workbench or be mounted in a rack (mounting hardware sold separately). A power cord with a three-prong plug is included for connecting the PSU to a grounded outlet, and the PSU has 4mm sheathed banana jacks for connecting devices with sheathed or shrouded banana plugs. The PSU has a removable handle for carrying or for propping up the meter during use. A built-in cooling fan helps prevent overheating, and a 0.5-amp fuse turns off the unit in case of overload, helping to prevent damage to the PSU and the device under test. This B&K Precision 9120A series power supply unit is available with a choice of rating voltage and current, line and load regulation, ripple and noise characteristics, ripple current, and weight.
|Number of outputs||1|
|Voltmeter measurement accuracy||0.02% + 2mV (millivolts), at 0 to 12V; 0.02% + 3 mV, at 0 to 40V|
|Milliohm meter measurement accuracy||0.1% when voltage and current are greater than 10% of full scale; 0.3% when voltage and current are at 3 to 10% of full scale|
|Transient response time||Less than 150 μs (microseconds) for output to recover to within 75mV following a change from 100mA (milliamp) to 1 amp|
|Operating temperature and humidity||0 to 40 degree C, less than 75% relative humidity|
|Power requirements||115V or 220VAC, + or – 10%, at 47 to 63 Hz|
|Standards met||International Electrotechnical Commission (IEC) 61010 Category II installations|
|Dimensions||88.2 x 214.5 x 354.6mm/3.47 x 8.45 x 13.9 inches (H x W x D)|
H is the vertical distance from lowest to highest point, W is the horizontal distance from left to right, and D is the horizontal distance from front to back.
Power supply units (also known as PSUs, AC power supplies, DC power supplies, and battery eliminators) provide AC or DC voltage to power or test devices such as tools, appliances, and electronic components. The PSU draws energy from a line source such as a wall socket and converts it to a constant, specified amount of voltage or current that is then outputted to a connected device. In general, a power supply unit will be classified as either a linear PSU (also known as a linear regulation or line-frequency PSU) or a switched PSU (also known as a switching-mode power supply, SMPS, or switcher). Typically, a linear PSU has a simpler design and provides a faster transient response time and less electrical interference and noise than a switched PSU. A switched PSU is often smaller, lighter, and more efficient than a linear PSU and generates less heat. The transient response time of a PSU indicates how quickly the PSU can resume the desired constant output after a sudden change in input. Ripple voltage or current indicates how much unfiltered noise and AC voltage or current is present at the output of a filtered power supply operated at full load. The temperature coefficient is the percent average change in output voltage per degree centigrade of change in ambient temperature. Fuses, current limiters, and other forms of overload protection can be built into the PSU to help protect against voltage spikes or short-circuiting.
B&K Precision manufactures test and measurement instruments for research and development, production-line testing, and electronic field service applications. The company, founded in 1951, is headquartered in Yorba Linda, CA. It meets International Organization for Standardization (ISO) standard 9001:2008 and is compliant with Restriction of Hazardous Substances (RoHS) and waste electronic and electrical equipment (WEEE) directives.
What's in the Box?
- B&K Precision 9120A series power supply unit
- RS-232-to-TTL serial converter cable
- USB-to-TTL serial converter cable
- Software installation disk
- Power cord
- Calibration report
Features & Highlights
- Linear power supply unit provides a constant source of DC voltage and current for powering and testing electronic devices
- One output provides an adjustable voltage or current
- Built-in digital voltage and milliohm meter for checking output values
- Internal memory stores up to 50 operating states for future recall
- Includes RS-232-to-TTL or USB-to-TTL serial converter cables for connecting to a computer for remote control
|Manufacturer:||B&K Precision Corporation|
|Publisher:||B&K Precision Corporation|
|Studio:||B&K Precision Corporation|
|Package Weight:||18.25 pounds|
|Package Size:||12.2 x 8.2 x 8.2 inches|